BattleMech Technical Readout
Type/Model: | Adder (Puma) A |
---|---|
Tech: | Clan / 3050 |
Config: | Biped OmniMech |
Rules: | Level 2, Standard design |
Mass: | 35 tons |
Chassis: | Endo Steel |
Power Plant: | 210 XL Fusion |
Walking Speed: | 64.8 km/h |
Maximum Speed: | 97.2 km/h |
Jump Jets: | None |
Jump Capacity: | 0 meters |
Armor Type: | Ferro-Fibrous |
Type/Model: | Adder (Puma) A |
---|---|
Mass: | 35 tons |
Equipment: | Crits | Mass | |
---|---|---|---|
Internal Structure: | 58 pts Endo Steel | 7 | 2.00 |
(Endo Steel Loc: 1 LT, 1 RT, 1 CT, 2 LL, 2 RL) | |||
Engine: | 210 XL | 10 | 4.50 |
Walking MP: | 6 | ||
Running MP: | 9 | ||
Jumping MP: | 0 | ||
Heat Sinks: | 10 Double [20] | 4 | .00 |
(Heat Sink Loc: 1 LT, 1 RT) | |||
Gyro: | 4 | 3.00 | |
Cockpit, Life Support, Sensors: | 5 | 3.00 | |
Actuators: | L: Sh+UA, R: Sh+UA | 12 | .00 |
Armor Factor: | 115 pts Ferro-Fibrous | 7 | 6.00 |
(Armor Crit Loc: 1 HD, 1 LA, 1 RA, 2 LT, 2 RT) |
Internal | Armor | ||
---|---|---|---|
Structure | Value | ||
Head: | 3 | 9 | |
Center Torso: | 11 | 16 | |
Center Torso (Rear): | 6 | ||
L/R Side Torso: | 8 | 12/12 | |
L/R Side Torso (Rear): | 4/4 | ||
L/R Arm: | 6 | 12/12 | |
L/R Leg: | 8 | 14/14 |
Weapons & Equipment: | Loc | Heat | Ammo | Crits | Mass |
---|---|---|---|---|---|
1 LRM 20 | RA | 6 | 24 | 8 | 9.00 |
(Ammo Loc: 2 LA, 2 RA) | |||||
1 Small Pulse Laser | RA | 2 | 1 | 1.00 | |
1 LRM 20 | LA | 6 | 4 | 5.00 | |
1 Small Pulse Laser | LA | 2 | 1 | 1.00 | |
1 Flamer | CT | 3 | 1 | .50 | |
TOTALS: | 19 | 64 | 35.00 | ||
Crits & Tons Left: | 14 | .00 |
Calculated Factors: | |
---|---|
Total Cost: | 7,217,438 C-Bills |
Battle Value: | 1,304 |
Cost per BV: | 5,534.85 |
Weapon Value: | 1,135 / 1,135 (Ratio = .87 / .87) |
Damage Factors: | SRDmg = 28; MRDmg = 18; LRDmg = 11 |
BattleForce2: | MP: 6, Armor/Structure: 3/2 |
Damage PB/M/L: 4/3/2, Overheat: 0 | |
Class: ML, Point Value: 13 | |
Specials: omni, if |
Created with HeavyMetal Pro
This design was originally published by FASA. BattleTech is now owned by WizKids.